BR-29015

A Doppler radar antenna especially designed for short to long range velocity measurement on all kinds of projectile.01


bwd  images 1/2  fwd
01.jpg
02.jpg
03.jpg

Description

General Description

The BR-29015 Doppler radar antenna utilizes the Doppler principle to measure the velocity of moving objects. It is particularly well suited for measuring the velocity at the gun muzzle, but is also powerful enough to measure velocity at short and long range, for projectile calibers ranging from 5.56mmm to 155mm including standard projectiles, basebleed, tracers, APFSDS, sub-calibers, rockets, etc.

The radar antenna consists of a transmitting and a receiving antenna (bi-static configuration). The transmitter output power can be selected between 1W and 15W to accommodate short and long range measurements. The receiver has a very low noise figure in order to provide maximum sensitivity and detection range. It also provides adequate filtering to reduce the likelihood of interference from other nearby radars operating in the same frequency range.

When used in conjunction with Infinition’s junction box and TestCenter Doppler processing software, it provides a powerful tool for ballistic analysis.

Rugged Construction

The BR-29015 housing has been designed using magnesium casting to provide excellent rigidity while minimizing its weight. The entire unit is sealed to prevent dust and water from entering the housing and damaging the electronic components. The radar is painted white to minimize sensitivity to the heat generated by the sun. The BR-29015 unit can operate under a wide range of temperature and weather conditions.

Performances

Performance

The performance of the BR-29015 unit has been calculated based on actual measurements on different projectile calibers. The range performance in the table below takes into account the effect of the projectile aspect angle along the trajectory.

CaliberRange Performance
(typical / maximum)
5.56mm (-58dBsm RCS) > 800m / 1000m
155mm (-25dBsm RCS) > 6000m / 8600m

Specifications

Specifications

The BR-29015 specifications are shown below.

Antenna gain 29dBi
Antenna Type Flat Panel Microstrip
Beamwidth 4 x 4 deg
Polarization Vertical (horizontal optional)
Transmitter Output Power 1 or 15W, selectable
Transmitter Source Phase locked DRO, CW
Modulation None
Frequency 10.525Ghz (nominal)
Stability +/- 5ppm
Receiver Noise Figure < 1.8dB (all losses combined)
Radial Velocity Coverage 30 - 5000 m/s
Operating Temperature -20 to 50 degC
Supply

115VAC 60Hz 2.0A (North America Model)

230VAC 50Hz 1.0A (European Model)

Dimension 83cm x 45cm x 10cm
Weight 21kg
Approvals FCC

Downloads


Social networks

AddThis Social Bookmark Button
Main site Products 10 GHz Radars BR-29015