• Home
• About Us
• Products
• Support
• Contact Us

• CW Doppler Radar Systems
  • Fixed Radar Heads
  • Radar Heads with Motion
  • Tracking Radars

• Doppler Processor Software
  • TestCenter STD
  • TestCenter TRK

• Hardware Components
  • BR-3502 Fixed Radar Head
  • BR-520 Fixed Radar Head
  • BR-1001 Fixed Radar Head
  • BR-1022 Fixed Radar Head
  • BDR-29010 Radar Head with Motion
  • BTR-35060 Tracking Radar
  • JB-500 Junction Box
  • JB-6000e Junction Box
  • AT-01 Acoustic Trigger Device
  • Flash Detector

• Accessories
  • Cables
  • Cable Reel

BTR-35060, 10.5GHz Tracking Radar

The BTR-35060 continuous wave (CW) Doppler tracking radar can provide accurate data on a variety of ballistic targets such as standard projectiles, projectiles with tracer or basebleed, APFSDS projectiles, rockets, mortars, etc. The system basically consists of the pedestal, transmitter antenna, receiver antenna, real-time processor and operator console software running on a PC.

System Highlights

Doppler Processing

• Measures on standard projectiles, projectiles with basebleed or tracer, mortars and rockets with different calibers (ex: 5,56mm, 155mm, etc.).
• Tracking on multiple objects.
• Velocity measurement based on the Doppler principle.
• Position tracking based on the phase comparison monopulse principle.
• Range measurement using Integrated Velocity Ranging (IVR).
• Spin analysis on projectiles/rockets.
• Drag analysis and trajectory prediction using the PM or MPM ballistic models.
• Rate of fire measurement (burst firing).
• Impact prediction based on measured position data.
• Maximum recording time limited by the available disk space.
• Advanced report generation using Microsoft Excel.
• Standard Desktop or Laptop based console computer.

Real-time Doppler Processor

• Real-time detection of up to 128 moving targets simultaneously.
• 3 real-time tracking gates.
• Active skin tracking or pre-programmed motion.
• Normal or ballistic coast mode in case of momentary signal lost.
• Gigabit Ethernet link between the real-time processor (located at the mount) and the host computer system (operator console).
• Remote operation over a TCP/IP network.

Antennas & Pedestal

• Solid state transmitter and receiver.
• 35 dBi antenna gain on both the transmitter and receiver antenna (38dBi total antenna gain), microstrip technology.
• Variable transmitter power up to 60 Watts (minimum).
• Variable beamwidth.
• 2 axes pedestal (elevation over azimuth type) for target tracking.
• 2 stages PID servo loop control with digital encoders on both axes.
• High precision mechanical design for maximum accuracy.
• Resistant to dust, dirt and water.
• Designed to be highly mobile (tripod or trailer mounted)

Range Performance (typical / maximum)

• 5.56mm: 3200m / 4100m
• 155mm: 20000m / 25000m